Depending on the customer's requirements, these grinders can carry out one, two or three of the above operations.
These grinders can be used either as units of fully automatic production lines or as stand alone machines.
These grinders for truck linings are ideal for both the OE Manufacturers, thanks to their high grinding quality and for the Aftermarket Suppliers, thanks to their very short set up time and to the minimum requirement for tooling.
The need for dedicated tooling is minimum, being limited to one internal diameter grinding wheel for each different internal diameter of the lining and, when the wear indicator is to be ground, a roller for each different internal diameter.
Set up time is included between 5 and 25 minutes, depending on the number of operations to be carried out and on the types of controls.
GRINDER VERSIONS AND OPERATIONS:
- RCF.50/SW: Sides and wear indicators of truck linings
- RCF.50/C: OD chamfers of truck linings
TYPES OF CONTROLS FOR POSITIONING THE GRINDING WHEELS and the other adjustments
- Manual adjustments
- Numerical control adjustments in accordance to the CVL values stored into the memory of the machines